How Does Fishing Work?
HOW IT WORKS - FEATURED
When equipment breaks or falls into a well, fishing is performed to remove the stray object and get drilling back on track....
Read more

Classroom Courses
Rig Inspection Workshop - LR, Platform- & JU rigs
Nov 19 - 22
Dubai, UAE

Lloyd’s Register’s Rig Inspection Workshop (RIW) teaches the inspection and maintenance procedures required to ensure equipment integrity onland rigs, platform rigs and jack-up rigs. Candidates learn to implement the relevant standards and understand industry requirements so that they can verify the condition of a rig’s equipment and improve safety, thus reducing the number of accidents and protecting the asset.
CSA Z662 Oil and Gas Pipeline Systems Code
Nov 23 - 24
City Center, Calgary, Canada

This 2 day course will provide a review of the CSA Z662 Code including updates, with an emphasis on practical application to oil and natural gas pipeline design, construction and operation in onshore areas. The course is designed for pipeline engineers, technologists, inspectors or other professionals who require a working knowledge of Z662.
Fundamentals of Reservoir Engineering
Nov 27 - Dec 1
City Center, Calgary, Canada

This 5 day course is designed to introduce the fundamental aspects of reservoir engineering. Theoretical concepts and practical case histories are presented to assist reservoir and exploitation engineers in their primary functions - the determination of oil and gas reserves and the maximization of hydrocarbon recovery under various schemes.
International Oil, Gas and Energy Law
Nov 27
Distance Learning,

The course focusses on the practical aspects of oil and gas law and is set in the broader context of contemporary energy regulation, law and policy. It seeks to develop a deep understanding of how to resolve the challenges posed to international energy corporations, national and regional authorities, and those working in the renewable sector.
Basic Reservoir Engineering: BR
Nov 27 - Dec 1
PetroSkills Conf. Center, Houston, TX, US

Basic Reservoir Engineering is a course designed to help the participants develop a more complete understanding of the characteristics of oil and gas reservoirs, from fluid and rock characteristics through reservoir definition, delineation, classification, development, and production.
Oil Production & Processing Facilities: PF-4
Nov 27 - Dec 8
PetroSkills Conf. Center, Houston, TX, US

The emphasis of this course is on oil production facilities - from the wellhead, to the delivery of a specification crude oil product, to the refinery. Both onshore and offshore facilities are discussed. Produced water treating and water injection systems are also covered.
Acid Gas Compression and Injection
Nov 28
City Center, Calgary, Canada

This one-day course provides a comprehensive overview of the design and operational aspects of acid gas compression and injection projects. The presentation includes a detailed discussion of the phase behavior of acid gas and outlines the methods for estimating the properties of acid gas for the design of the compression and injection facilities.
Metering of Natural Gas and Associated Liquids
Nov 30
City Center, Calgary, Canada

Accurate metering is the foundation for equitable plant products and revenue allocation. Natural gas is metered about four times between the wellhead and the gas transmission system. In the past, virtually all metering of natural gas in the field and in the plants was done with the orifice meter. The standards that are followed for the installati
Coating Inspector Program (CIP) Level 2
Dec 3 - 8
NACE Training Center, Houston, US

Focus on advanced inspection techniques and specialized application methods for both steel and non-steel substrates, including concrete using both nondestructive and destructive techniques. Surface prep, coating types, inspection criteria, lab testing, and failure modes for various coatings, including specialized coatings and linings are covered.
Fundamentals of Pump & Compressor Systems: ME-44
Dec 4 - 8
PetroSkills Conf. Center, Houston, TX, US

This is an intensive 5-day course providing a comprehensive overview of pumps and compressor systems. The focus is on equipment selection; type, unit, and station configuration; and integration of these units in the process scheme and control strategy in upstream and midstream oil and gas facilities.
Petroleum Risk & Decision Analysis: PRD
Dec 4 - 8
PetroSkills Conf. Center, Houston, TX, US

Good technical and business decisions are based on competent analysis of project costs, benefits and risks. Participants learn the decision analysis process and foundation concepts so they can actively participate in multi-discipline evaluation teams. The focus is on designing and solving decision models.
Project Management in Upstream Field Development: FPM2
Dec 4 - 6
PetroSkills Conf. Center, Houston, TX, US

Upon completion of this course, the participant will understand the engineering, procurement, and construction phases, and be able to utilize fit-for purpose project management techniques and project control tools to facilitate successful project outcomes.
Fundamentals of Reservoir Engineering
Dec 4 - 8
Westchase District, Houston, US

This 5 day course is designed to introduce the fundamental aspects of reservoir engineering. Theoretical concepts and practical case histories are presented to assist reservoir and exploitation engineers in their primary functions - the determination of oil and gas reserves and the maximization of hydrocarbon recovery under various schemes.
Gas Conditioning & Processing: G4
Dec 4 - 15
PetroSkills Conf. Center, Houston, TX, US

The Campbell Gas Course has been the standard of the industry for more than 47 years. Over 36,600 engineers have attended our G-4 program, considered by many to be the most practical and comprehensive course in the oil and gas industry.
more training events
Events  SUBSCRIBE TO OUR NEWSLETTER

Our Privacy Pledge
SUBSCRIBE